Aditivo reológico
Aditivo reológico is an organo clay (Benonita modificado), Diseñado pa ár njapu'befi sistemas a base de solventes, incluido ar Liquild orgánico rango ar polaridad intermedio ne hñets'i'i.
Ventajas | Aditivo reológico
- Exerts gelling efficiency over a wide range of intermediate and low polarity.
- High thixotropy.
- Produce reproducible thixotropic consistency over a wide temperature range
- Imparts particle suspension, sag resistance without impairing flow and leveling, preventing hard settling of pigment and fillers.
Typical properties | Aditivo reológico
| Composición | Organic derivative of a montmorillonite clay |
| Apariencia | Fine white powder |
| Contenido humedad(105°C,2Hr) | ≤3.5% |
| Pérdida ya ignición, %(1000°C) | <29% |
| Bulk density | 0.54g/cm3 |
| Fineza (200 mesh) | ≥98% |
Nt'ot'e
- Paints with low to medium polarity solvents.
- Drilling fuilds, in diesel based mud.
- Grease,
Usando
CP-24B disperses under high shear and requires a polar activator (30%~40%) for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Polar activator (95% Ethanol or 95% Methanol) is needed. Normally addition level of polar activator is recommended to be 30%~40% of CP-24B in weight. Pre-gel procedure is as below.
- Charge solvent to mill
- Slowly add CP-24B (8-10% by weight of total pregel) to mill under agitation.
- Mix at high speed for 5 acta.
- Añadir activador polar.
- Mix at high speed for 5 acta.
Hñeti: The suggested addition level of our organoclay and polar activator is based on our lab testing. Exact dosage for detail formulation should be based on user’s testing.